Experience
- 5 to 8 years
- The applicants should have experience in the following business area(s): Pharmaceutical/Medicine Companies
Education
B.Sc. in Engineering in Mechanical, Electrical, Industrial, Mechatronics or related engineering discipline from a recognized university.
Requirements
- 5 to 8 years
- The applicants should have experience in the following business area(s): Pharmaceutical/Medicine Companies
Additional Requirements
Experience
Typically 5–8 years of relevant experience in engineering/maintenance, preferably in the pharmaceutical industry.
Experience in pharmaceutical manufacturing facilities, particularly in HVAC, utilities, production equipment and GMP-compliant maintenance, will be highly preferred.
Previous supervisory or team-management experience is desirable
Required Technical Knowledge
The incumbent should have good practical knowledge of:
Pharmaceutical manufacturing equipment
HVAC and cleanroom systems
Chiller and cooling systems
Boiler and steam systems
Compressed-air systems
Water treatment/PW/WFI systems
Electrical power distribution
Generators and UPS
Preventive and predictive maintenance
Equipment troubleshooting
Calibration
Qualification and validation
GMP requirements
Engineering documentation
Energy management
Occupational safety
Root-cause analysis and CAPA
CMMS/ERP systems, where applicable
Responsibilities & Context
Job Purpose
To ensure reliable, safe and efficient operation and maintenance of all pharmaceutical manufacturing equipment, utilities, facilities and engineering systems. The position is responsible for minimizing equipment downtime, maintaining GMP-compliant engineering systems, optimizing energy consumption, and ensuring timely preventive and corrective maintenance in accordance with approved SOPs, safety standards and regulatory requirements.
Also supervise Engineers, Officers, Technicians, Operators and Engineering Support Staff
Department: Engineering / Technical Services
Industry: Pharmaceutical Manufacturing
Location:
B.K Bari Factory, Mirzapur Gaipur
Satirpara factory, Narsingdi Bangladesh
Key Responsibilities
A. Engineering Operations & Maintenance
Supervise day-to-day engineering and maintenance activities of the pharmaceutical manufacturing facility.
Ensure continuous availability and reliable operation of production equipment and critical utilities.
Plan and execute preventive, predictive and corrective maintenance activities.
Respond promptly to equipment breakdowns and minimize production downtime.
Analyze recurring equipment failures and implement permanent corrective actions.
Maintain proper maintenance history and equipment records.
Ensure equipment is operated and maintained according to approved SOPs and manufacturer's recommendations.
B. Production Equipment Maintenance
Ensure proper maintenance of pharmaceutical manufacturing and packaging equipment such as:
Tablet compression machines
Coating machines
Granulators
Blenders
Fluid bed dryers
Capsule filling machines
Liquid manufacturing systems
Filling and sealing machines
Packaging machines
Conveyors and material-handling equipment
Coordinate with Production and QA for equipment availability and maintenance requirements.
Support equipment installation, commissioning, qualification and troubleshooting.
Monitor machine performance and identify opportunities for improvement.
C. Utility Management
Ensure reliable operation and maintenance of critical pharmaceutical utilities, including:
HVAC systems
Chillers
Boilers
Air compressors
Cooling towers
Generators
Water treatment systems
Purified Water (PW) systems
Water for Injection (WFI) systems, where applicable
Vacuum systems
Compressed air systems
Steam systems
Electrical distribution systems
Fire protection systems
Other plant utilities
Monitor utility parameters and ensure they remain within approved operating limits.
Maintain utility systems in accordance with GMP and applicable engineering standards.
Investigate utility failures and implement corrective actions.
D. HVAC & Cleanroom Systems
Ensure proper operation and maintenance of HVAC systems serving production and controlled areas.
Monitor temperature, relative humidity, pressure differentials and air-handling parameters.
Coordinate preventive maintenance of AHUs, FCUs, filters, ducts and associated systems.
Support HEPA filter integrity testing, air balancing and HVAC qualification activities.
Investigate HVAC deviations and support CAPA implementation.
Ensure HVAC systems remain suitable for the required pharmaceutical manufacturing environment.
E. Electrical Engineering
Supervise operation and maintenance of electrical systems and distribution networks.
Ensure reliable operation of transformers, generators, MCCs, DBs, panels, UPS and related systems.
Monitor electrical load, power quality and energy consumption.
Ensure preventive maintenance of electrical installations.
Coordinate electrical breakdown troubleshooting.
Maintain electrical safety and ensure compliance with applicable standards.
Support statutory inspections and testing where applicable.
F. Preventive & Predictive Maintenance
Develop and implement annual, monthly and daily preventive maintenance schedules.
Ensure preventive maintenance is completed within the approved timeframe.
Monitor maintenance KPIs such as:
Equipment availability
Mean Time Between Failures (MTBF)
Mean Time To Repair (MTTR)
Breakdown frequency
Preventive maintenance compliance
Downtime
Introduce condition-based and predictive maintenance practices where appropriate.
Review maintenance trends and recommend improvement actions.
G. GMP & Regulatory Compliance
Ensure engineering activities comply with cGMP, SOPs, safety requirements and applicable regulatory standards.
Ensure engineering systems supporting GMP areas are properly maintained and documented.
Participate in internal, customer and regulatory audits.
Support regulatory inspections and provide engineering-related documents and records.
Ensure timely closure of engineering-related audit observations.
Maintain proper engineering documentation and data integrity.
H. Qualification & Validation
Support qualification and validation activities for equipment and utility systems.
Coordinate with QA and Validation teams during qualification activities.
Ensure engineering systems remain in qualified/validated status.
Support calibration and verification of critical instruments.
I. Calibration Management
Ensure timely calibration of critical measuring and monitoring instruments.
Maintain calibration schedules and records.
Coordinate with approved external calibration agencies where required.
Investigate calibration failures and assess potential impact on equipment/processes.
Ensure instruments are properly identified and calibration status is clearly indicated.
J. Spare Parts & Engineering Inventory
Identify critical spare parts for production equipment and utility systems.
Maintain adequate stock of critical engineering spares.
Prepare annual and periodic spare-parts requirements.
Coordinate with Procurement and Stores for timely availability of spare parts.
Monitor consumption and optimize spare-parts inventory.
Evaluate alternative parts and vendors where appropriate without compromising equipment performance or GMP requirements.
K. Project & Installation Management
Support engineering projects, equipment installation and facility expansion.
Review technical specifications and equipment layouts.
Participate in vendor selection and technical evaluation.
Coordinate installation, commissioning and trial runs.
Review vendor drawings, manuals and technical documentation.
Ensure new systems/equipment meet approved specifications and GMP requirements.
Support project handover and preparation of equipment documentation.
L. Energy Management
Monitor consumption of electricity, gas, water, steam and other utilities.
Identify opportunities for energy and utility cost reduction.
Implement energy-saving initiatives without compromising GMP or product quality.
Monitor major energy-consuming equipment and systems.
Prepare periodic utility consumption and efficiency reports.
M. Safety & Environmental Compliance
Ensure safe operation of engineering equipment and utility systems.
Implement engineering-related occupational health and safety requirements.
Ensure appropriate PPE and safe working practices are followed.
Support fire safety, emergency preparedness and disaster-management activities.
Ensure safe isolation/LOTO procedures are followed during maintenance.
Coordinate with EHS regarding engineering-related safety risks and corrective actions.
N. Documentation & Reporting
Ensure accurate and timely completion of:
Equipment logbooks
Preventive maintenance records
Breakdown reports
Work orders
Calibration records
Utility monitoring records
Engineering SOPs
Maintenance reports
Spare-parts records
Prepare daily, weekly and monthly engineering reports.
Report major breakdowns, deviations, safety incidents and engineering risks to management.
Maintain proper engineering documentation in accordance with document-control requirements.
O. Deviation, CAPA & Change Control
Participate in investigation of engineering-related deviations and failures.
Conduct root-cause analysis using appropriate problem-solving techniques.
Develop and implement corrective and preventive actions.
Initiate and support engineering change controls.
Assess impact of engineering changes on GMP, product quality, validation and production operations.
Ensure approved changes are properly implemented and documented.
P. Team Management & Development
Supervise Engineers, Officers, Technicians and other engineering personnel.
Allocate manpower according to maintenance and operational requirements.
Prepare duty/shift schedules where applicable.
Monitor individual and team performance.
Provide technical training on equipment, utilities, GMP and safety.
Develop team members through coaching and knowledge sharing.
Promote a culture of preventive maintenance, safety and continuous improvement.
Q. Vendor & Contractor Management
Coordinate with equipment suppliers, service providers and maintenance contractors.
Evaluate vendor technical proposals and service performance.
Supervise contractor activities inside the factory.
Ensure contractors follow GMP, safety and site requirements.
Verify completion of maintenance/service work before approval.
Review vendor service reports and technical documentation.
Job Other Benifits
Must stay in factory premises.
Gratuity, Provident fund
Lunch Facilities: Partially Subsidize
Salary Review: Yearly