The Linksys wifi extender is your savior when issues with the internet arise. Your wireless network range is extended using the extender linksys setup. The installation of a Linksys wifi extender reduces wireless disconnectivity and covers your complete home.
Let’s talk about the extender linksys setup procedure now.
You can do Linksys extender setup via two methods:
- Manual way.
- WPS method.
Linksys WiFi Extender setup via Manual way
Manual configuration of a device or system excludes the use of automatic or predetermined settings.Manual setup provides more flexibility and control over the extender linksys setup procedure as compared to automatic setup methods. You can modify the device settings to match your tastes, network requirements, and environment.
The following are the quick methods for manually setting up a Linksys wifi extender:
- Connect the extension to a power outlet beside your main router.
- Connect to the “Linksys Extender Setup” network using a Wi-Fi enabled device.
- In the address box of your web browser, type extender.linksys.com or the extender’s default IP address, for instance, 192.168.1.1.
- The setup page’s on-screen instructions should be followed.
- Select your main Wi-Fi network from the list, then enter the network’s password.
- Complete any other configuration steps, such as providing a new network name (SSID) and password for the extension.
- Wait for the extender to reboot, and you should then receive a confirmation message that the configuration is complete.
You can easily set up a Linksys wifi extender in this manner. Go to the second option, the WPS push button approach, if you’re having trouble setting up your Linksys extension.
Linksys wifi extender firmware update
Firmware is the collective name for hardware and software. If your firmware isn’t regularly updated, your extender won’t work properly.. Updates to the extender’s firmware increase extender range and decrease network disconnectivity, allowing you to use your wifi network uninterrupted.
The following lists the steps for updating firmware.
- In the first step , activate your extender.
- Take a smartphone.
- Look up extender.linksys.com.
- Select Settings by tapping.
- To upgrade the firmware, select it now.
- To finish the setup, follow the directions displayed on screen.
- While the procedure is still in progress, do not unplug your extender.
To follow these steps you can easily update our Linksys wifi extender firmware.
How to do Linksys wifi extender setup using the WPS method?
Another approach to configure the Wavelink WiFi Extender is through WPS. Using the WPS approach, you may extender linksys setup in about two to three minutes. No need to mention your account, password, or SSID while using the WPS method.
To configure the Linksys WiFi extender, follow these instructions.
- First of all, Your extender should be on.
- Ensure that the extender is situated near to the router.
- Your extender’s WPS button should be pressed.
- Activate WPS on your home router as well.
- The WPS button illuminates a steady green light for you.
- The LED green light means that your router and extension connection is stable.
- Your extender should now be unplugged so that you can relocate it.
- Connect your smart gadgets to the wifi extender at this point.
Factory reset process
When you reset your extender, keep in mind that all of your previous data is lost, and your extender is ready for a new installation.
The instructions for the Linksys extender setup reset are as follows:
- Your extender should be on.
- There is a factory reset hole is located the side of the extender.
- Pick up a sharp paper pin.
- After inserting the paper pin, strike the reset button for 8 seconds.
- Release the reset button when your LED light starts to blink.
- Your reset procedure is now completed
Common issues
- The extender’s LED lights are unsteady.
- It is not possible to log into the Linksys wifi extender setup
- No internet connection on linksys extender
- Failure of the Linksys upgrade not working
- WiFi extenders and internet connectivity problems
- incorrect password for extender.linksys.com
- The WiFi extension is not linked to the network.
- Linksys Genie won’t start up.
- 192.168.1.1 IP address cannot be accessed
- No such network name for the range extender
- The Extender is not working properly.
- The Linksys extender has no internet.
- Issues with red extender light
- having trouble resetting the extender
- WiFi connectivity issues
- The genie smart setup screen still remains even after the Linksys extender setup is complete.
Troubleshooting steps
- Check to see if the wall plug is giving the Linksys extender the right amount of electricity from the wall outlet.
- Verify that nothing is shorted or broken before connecting the extension.
- Check every single electrical connection. Use only untouched cables.
- Get a high-speed internet connection with your device.
- Avoid placing your Linksys wifi extender near things like microwaves, fish tanks, cordless phones, room corners, metal objects, walls, and walls, as well as aluminum studs.
- If you are having issues with extender.linksys.com, double-check that you have entered the correct URL in the address field.
- After a power cycle, try setting up your extension once more.
You can extend your extender linksys setup performance by following these troubleshooting steps.
